Dyna-Glo RMC-KFA120T User Manual download pdf (Page 11)

C.) AIR OUTPUT FILTER, LINT FILTER

REPLACE EVERY 500 HOURS OF OPERATION

OR ONCE A YEAR.

- Remove upper shell and fan guard (See page 9).

- Remove end filter cover screws using medium phillips

screwdriver.

- Remove end filter cover.

- Replace air output and lint filter.

- Reinstall end filter cover.

- Reinstall fan guard and upper shell.

D.) FAN BLADES

CLEAN EVERY SEASON OR AS NEEDED.

- Remove upper shell (See page 9).

- Use M6 allen wrench to loosen set screw

which holds fan blade to motor shaft.

- Slip fan blade off motor shaft.

- Clean fan blade using a soft cloth

moistened with kerosene or solvent.

- Dry fan blade thoroughly.

- Reinstall fan blade on motor shaft. Place

fan blade hub flush with end of motor shaft.

- Place set screw on flat of shaft. Tighten set screw firmly

(40-50 inch-pounds/4.5-5.6 N-m).

- Reinstall upper shell.

E.) NOZZLE

REMOVE DIRT IN NOZZLE AS NEEDED (SEE PAGE 16).

(For RMC-KFA45T/65T/120T/170T Models Only)

- Remove upper shell (See page 9).

- Remove fan blade (See Section D above).

- Remove fuel and air line hoses from burner head.

- Remove ignitor wire from spark plug.

- Remove three screws using

medium phillips screwdriver and

remove burner head from

combustion chamber.

- Remove spark plug from burner

head using medium phillips

screwdriver.

- Carefully remove nozzle from

burner head using 5/8” socket

wrench.

- Blow compressed air through face

of nozzle. (this will remove any

dirty in nozzle)

- Reinstall nozzle into burner head

and tighten firmly. (80~110 inch-

pounds)

- Reinstall spark plug in burner head.

- Attach burner head to combustion chamber.

- Attach ignitor wire to spark plug.

- Attach fuel and air line hoses to burner head.

- Reinstall fan blade and upper shell.

Figure 11.

Figure 12.

Figure 13.

Motor Shaft

Set screw

Flush

Set screw

Motor Shaft

Fan Blade

Fan

Blade

End filter cover

Lint Filter

Intake

Filter

Air Output Filter

Screw

Spark Plug

Nozzle

Burner

Head

Air Line Fitting

Fuel Line Fitting

Nozzle Face

Ignitor Wire

Fuel Line Hose

Air Line Hose

Combustion

Chamber

Burner head

NEVER LEAVE THE HEATER

UNATTENDED WHILE BURNING!

1 2 ... 6 7 8 9 10 11 12 13 14 15 16 ... 27 28

Comments to this Manuals

No comments

Dyna-Glo RMC-KFA120T User Manual Page 11

Comments to this Manuals

Related products and manuals for Space heaters Dyna-Glo RMC-KFA120T