Dyna-Glo RMC-KFA120T User Manual download pdf (Page 13)

NEVER LEAVE THE HEATER

UNATTENDED WHILE BURNING!

(For RMC-KFA 210T Models Only)

- Remove upper shell (See page 9).

- Remove fan (See page 10).

- Remove ignitor wire from spark plug.

- Remove spark plug from bracket-spark using medium

phillips screwdriver.

Clean and regap spark plug electrodes to 3.5mm gap.(0.138")

- ReInstall spark plug in bracket-spark.

- Attach ignitor wire to spark plug.

- Reinstall fan and upper shell.

G.) PHOTOCELL

CLEAN PHOTOCELL ANNUALLY OR AS NEEDED.

(For RMC-KFA 45T/65T/120T/170T Models Only)

- Remove upper shell (See page 9).

- Remove fan (See page 10).

- Remove photocell from it’s mounting.

Clean photocell lens with cotton swab.

TO REPLACE: Remove side cover near

on/off switch.

- Disconnect wires from circuit board and

remove photocell.

- Install new photocell and attach wires to

circuit board.

- Replace fan and upper shell.

Figure 16.

Figure 17.

Side cover

circuit board

Photocell

wires

Photocell

Install Photocell

1)Incorrect

2)Correct

Photocell

lens

(For RMC-KFA 210T Model Only)

- Remove upper shell (See page 9).

- Remove fan (See page 10).

- Remove photocell from it’s mounting.

Clean photocell lens with cotton swab.

TO REPLACE : Remove side cover

opposite on/off switch.

- Disconnect wires from circuit board and

remove photocell.

- Install new photocell and attach wires to

circuit board.

- Replace fan and upper shell.

Figure 18.

Photocell

Install Photocell

1)Incorrect

2)Correct

Photocell

lens

circuit board

Side cover

Photocell

wires

Bracket Burner

Bracket Spark

Spark Plug

Gap

Ignitor wire

1 2 ... 8 9 10 11 12 13 14 15 16 17 18 ... 27 28

Comments to this Manuals

No comments

Dyna-Glo RMC-KFA120T User Manual Page 13

Comments to this Manuals

Related products and manuals for Space heaters Dyna-Glo RMC-KFA120T